Table of Contents
Advertisement
Operation Manual / TPL76-C
8 Disassembly and assembly / 8.8 Dismantling and fitting nozzle ring
at turbine end
© Copyright 2020 . All rights reserved.
Tightening flange connection
Fit screws (61044).
u
Tighten screws (61044) in accordance with following procedure and in
u
following order:
Flange connection
Tighten screws crosswise
u
NOTICE
Screw tightening sequence
The screw positioning numbers must be marked on the component.
This enables simple and efficient tightening.
HZTL2485_EN
Rev.G
March 2020
Advertisement
Table of Contents
