Table of Contents
Advertisement
Operation Manual / TPL76-C
8 Disassembly and assembly / 8.6 Dismantling and installing the tur-
bine diffuser and nozzle ring
© Copyright 2020 . All rights reserved.
Replace two screws (61056) with guide studs (90320).
u
Fit assembly plate (90020) over studs (61036).
u
Screw nuts (61037) onto start of threads of studs (61036) to secure.
u
Remove remaining screws (61056).
u
Press away turbine diffuser (63000) using press-off screws (90901)
u
and withdraw it until assembly plate (90020) touches nuts (61037).
Loop lifting gear around turbine diffuser (63000) and secure to crane.
u
Remove nuts (61037) and assembly plate (90020) from studs.
u
Fully withdraw turbine diffuser and remove.
u
Remove guide studs (90320).
u
HZTL2485_EN
Rev.G
March 2020
Advertisement
Table of Contents
