Table of Contents
Advertisement
Operation Manual / TPL76-C
8 Disassembly and assembly / 8.8 Dismantling and fitting nozzle ring
at turbine end
Tightening torques for
screws (61044) [Nm]
with spiral-wound gasket
Tightening torques for
screws (61044) [Nm]
without spiral-wound
gasket
Checking the tightening
torque
© Copyright 2020 . All rights reserved.
Tightening
Step 1
Step 2
Step 3
Tightening
Step 1
Step 3
Beginning with screw 1, tighten all screws in a clockwise direction
u
with tightening torque from step 3.
Remove lifting gear from gas inlet casing (51001).
u
Connect cleaning pipe (if present) and attach insulation to gas inlet
u
casing (51001).
HZTL2485_EN
TPL76-C
Screw in all screws hand-tight
140
280
TPL76-C
Screw in all screws hand-tight
280
Rev.G
March 2020
Advertisement
Table of Contents
