Solid-State Drive; Removing The M.2 2280 Solid-State Drive In Slot One And Slot Two - Dell Alienware m18 R2 Owner's Manual

NOTE: Repeat the steps to install any other memory module into your computer.
NOTE: The securing clips should revert to a locked state. If you do not hear the clicking sound, take out the memory module
and reinstall it.
Next steps
1. Install the base cover.
2. Follow the procedure in

Solid-state drive

Removing the M.2 2280 solid-state drive in slot one and slot two

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
NOTE: This procedure is applicable only to computers shipped with an M.2 2280 solid-state drive installed in M.2 slot one
(SSD1) and M.2 slot two (SSD2).
NOTE: The M.2 card installed on M.2 slot one (SSD1) and M.2 slot two (SSD2) depends on the configuration ordered.
Supported card configurations:
● M.2 2230 solid-state drive
● M.2 2280 solid-state drive
The following image indicates the location of the M.2 2280 solid-state drive in slots one and two and provides a visual representation
of the removal procedure.
42
After working inside your
Before working inside your
computer.
computer.