Steps
1. Slide the tabs on the top of the base cover under the rear I/O-cover and snap the base cover to the palm-rest and keyboard
assembly.
2. Tighten the two captive screws (M2.5x8) on the base cover that secure the base cover to the palm-rest and keyboard assembly.
3. Replace the six screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure in
Memory
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
NOTE: This computer may have up to two memory modules installed.
The following image(s) indicate the location of the memory module and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
39