Table of Contents
Advertisement
4.
Fasten the thermostats back part
firmly to a flush mounted wall box
or an exterior wall box by driving
the screws through the holes in
each side of the thermostat.
5.
Click the front part module in
place. Pay attention, in relation to
the female header, in not to bend-
ing the connectors. Press carefully
until the frame is fixed firmly.
When mounting and reassembling the thermostat.
Important: Do NOT press in the center of the display
Battery:
The current time and day is kept for min. 60 days if mains
supply is off. All other settings are stored permanently.
10
screen.
DEVIreg™ Opti
Pic. 3
Pic. 4
Installation Guide
Advertisement
Table of Contents
