Vesa Standardized Mounting; Dante Channels; Intellimix Dsp - Shure MXA901-R Manual

VESA Standardized Mounting

The rear plate has 4 threaded holes for attaching the microphone to a VESA mounting device. The mounting holes follow the
VESA MIS-D standard:
•
Screw specification: M4 thread (hole depth = 9.15 mm)
•
Hole spacing: 75 mm square
Follow any local regulations when using VESA mounting devices.

Dante Channels

The MXA901 has:
•
1 automix output with IntelliMix DSP
•
1 AEC reference input

IntelliMix DSP

This device contains IntelliMix digital signal processing blocks that can be applied to the microphone's output. The DSP blocks
include:
•
Acoustic echo cancellation (AEC)
•
Automatic gain control (AGC)
Shure Incorporated
22/42