Shure MXA901-R Manual page 9

The microphone intelligently adjusts coverage for all talkers in the coverage area. IntelliMix DSP ensures a clear signal for the
far end with AEC, noise reduction, and more.
1. Install the MXA901 and other devices. Connect devices to PoE ports on the network switch using Ethernet cable.
2. Connect a computer with Shure Web Device Discovery and Dante Controller software to the same network.
3. Open Shure Web Device Discovery. Find the MXA901 in the list of devices and double-click to open the microphone's
web application.
Step 2: Route Audio
Use Dante Controller to route audio to and from other Dante devices. We'll route the MXA901's microphone signal to an
ANIUSB-MATRIX for this example.
1. Open Dante Controller and find both devices in the list of transmitters and receivers.
2. Make these routes:
◦
MXA901 automix output to ANIUSB-MATRIX input
◦
ANIUSB-MATRIX output to MXA901 AEC reference input. The AEC reference signal is usually the same one that
feeds the room's loudspeakers.
3. Send audio from the ANIUSB-MATRIX to other sources using the ANIUSB-MATRIX's matrix mixer. Open the ANIUSB-
MATRIX web application with Shure Web Device Discovery. A common destination is a computer connected by USB
with videoconferencing software (such as Zoom or Microsoft Teams).
Shure Incorporated
9/42