Advantech USC-360 Startup Manual page 4

Hide thumbs Also See for USC-360:

Installation Procedures (Cont.)

2. Plug Type-C cable to Type-C IO used for DP in USC-

360.

3. Integrated 2nd display stand and USC-360 stand with

the hook and hole in the stand base.

Short Side Peripheral Installation

1. Remove peripheral cover in side.

4 USC-360 Startup Manual

Installation Procedures (Cont.)

2. Plug MSR/Scanner/RFID module into USB connector

in USC-3.

3. Install the module and secure with 2pcs screws.

Install Scanner on IO Side

1. Remove cable cover.

2. Plug Scanner module into USB connector in USC-360.

3. Install the module and secure with 2pcs screws.