Memory Function - Audi A4 2023 Owner's Manual

Sitting correctly and safely
belt retractor. This automatic retractor allows the
safety belt to be pulled all the way out when the
belt is pulled slowly. However, the automatic re-
tractor locks during sudden braking maneuvers.
It also locks the belts when accelerating, driving
uphill, and driving around curves.
Belt force limiter
Safety belts with belt force limiters reduce the
force placed on the body by the safety belts dur-
ing a collision.
Fig. 68 Belt height adjustment for the front seats-safety Safety belt pretensioners
belt relay
In certain driving situations, safety belts may be
tightened with reversible belt tensioners when
» To move the belt higher, slide the safety belt re-
lay @ upward. you start driving. If the safety belt is too loose, it
will be tightened so that the belt will rest closer
» To move the belt lower, press the release but-
ton @ and slide the safety belt relay@down- to the body.
eL_L —
You can also adjust the height of the front
seats to change the position of the safety The pyrotechnic system can only provide pro-
belts. tection during one collision. If the pyrotechnic
belt tensioners deploy, the pretensioning sys-
Additional safety belt functions tem must be replaced by an authorized Audi
dealer or authorized Audi Service Facility.
Belt retractor lock
» If you secure a child safety seat with a safety cle fire.
belt, the belt retractor lock on the safety belt
may need to be activated. Follow the instruc- Memory function
tions from the child safety seat manufacturer. Linf
> When a vehicle passenger has fastened a safety
belt, the belt retractor lock should not be acti-._"\PHl'ssf0: vehicles with memory function
vated. If the belt retractor lock has been acti- With the memory function, you can save and call
vated unexpectedly, deactivate it. up seat profiles using the memory buttons in the
door trim panel. >
Deactivating or activating the belt retractor lock
© page 80.
71