Audi A4 2023 Owner's Manual page 18

Instrument cluster
Vehicle functions
The trip computer is displayed in the first tab of
the driver information system. Additional vehicle
functions can be accessed depending on the vehi-
cle equipment.
» Press the | button on the multifunction steer-
ing wheel.
—Trip computer © page 16
— Lap times > page 127
~ Lap statistics © page 127
— Reduced display page 14
On-board computer
Changing the display
» Turn the left thumbwheel on the multifunction
steering wheel @ © page 13, fig. 5 until the
desired display is shown.
Resetting values to zero
Requirement: the Consumption, Short-term
memory, or Long-term memory display must be
selected.
» To reset the values in one of the memories to
zero, press and hold the left thumbwheel on
the multifunction steering wheel for one sec-
ond, or
» Select on the instrument cluster: vehicle func-
tions tab > [=] button > Reset mi.
Displays in the trip computer
The following displays may be shown, depending
on the vehicle equipment:
~Time and date * page 216
~ Level
= Digital speedometer
— Average consumption page 16
— Range
— Short-term memory overview
— Long-term memory overview
— Energy consumers ® page 16
— Driver assistance page 134
~ Traffic sign recognition and traffic light infor-
mation
16
Short-term memory and long-term memory
The short-term memory collects driving informa-
tion from the time the ignition is switched on un-
til it is switched off. If you continue driving within
two hours after switching the ignition off, the
new values will be included when calculating the
current trip information.
Unlike the short-term memory, the long-term
memory is not erased automatically. You can se-
lect the time period for evaluating trip informa-
tion yourself.
Average consumption
The current consumption can be shown using a
bar graph. The average consumption stored in
the short-term memory is also displayed. If the
bar is green, your vehicle is saving fuel (for exam-
ple, using recuperation).
Energy consumers
The Energy consumers view lists other equip-
ment that is currently affecting fuel consump-
tion. The display shows up to three equipment
items. The equipment using the most power is
listed first. If more than three items using power
are switched on, the equipment that is currently
using the most power is displayed. A gauge also
shows the current total consumption of all other
equipment.
The date, time of day, and
mat can be set 2 page 276.