Audi A4 2023 Owner's Manual page 158

Parking and maneuvering
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras ® page 120.
Activating and deactivating
Applies to: vehicles with rearview camera/peripheral cameras
Fig. 126 Center console: parking aid button
Activating and deactivating
» Press the Ps button in the center console, or
» Press 9 on in the center display if the visual
distance indicator page 154, fig. 124 is
shown.
The system can be activated at low speeds, such
when maneuvering.
Automatic activation
The system activates automatically when reverse
gear is engaged while the engine is running.
Automatic deactivation
The system will deactivate automatically once
the vehicle exceeds a certain speed while driving
forward.
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras > page 120.
Clean rearview camera
Applies to: vehicles with rearview camera/peripheral cameras
Depending on vehicle equipment, you may be
able to manually initiate rear view camera clean-
ing.
156
» Move the window wiper lever W into the posi-
tion for cleaning the rear window © > page 59.
Observe the safety precautions and note the
limits of the assist systems, sensors, and
cameras page 120.
Applies to: vehicles with rearview camera/peripheral cameras
Fig. 127 Center display: aiming at a parking spot
When parking with the rearview camera or pe-
ripheral camera, the parking aid audio and visual
warnings* © page 154 will also assist you.
Visual orientation lines
@ The orange orientation lines show the vehi-
cle's direction of travel >@. Turn the steer-
ing wheel until the orange orientation lines
align with the parking space.
@® You can use the horizontal blue markings to
help you estimate the distance to an obsta-
cle. Each marking represents approximately
3 feet (1 meter). The blue surface is a static
display and represents an extension of the
vehicle perimeter to the rear.
® You can recognize the rear bumper in the
lower display.
® You should stop driving in reverse when the
red orientation line touches the edge of an
object, at the latest.
Symbols
Applies to: vehicles with peripheral cameras
If 2/%2/<53 is displayed and the display area
represented by that symbol is not available, then
the camera on the that side is not available. The
power exterior mirrors may have been folded in >