Table of Contents
Advertisement
Detailed Discussions of Bit 3
Select a reception mode after sending CFR signal.
Select "High speed" in the case of frequent errors caused by line condition at the time of reception. Simultaneously, turn
"OFF" the "ECM reception" of the user data.
NOTE:
Error codes caused by line condition at the time of reception
##107, ##114, ##201
Be sure to change bit 4 before changing this bit; if errors still occur, change this bit.
When 'high speed' is selected, only high-speed signals (images) will be received after sending the CFR signal.
Detailed Discussions of Bit 4
Select the time length during which low-speed signals are ignored after sending the CFR signal.
Select "1500 msec" when reception of image signal is difficult because the line condition is not good.
Detailed Discussions of Bit 5
Select whether to check the CI signal frequency when PBX is set.
Detailed Discussions of Bit 6
Select whether to send CNG signal at the time of manual sending.
If error occurs frequently at manual sending when the destination device that has FAX/TEL switch mode does not change
to the fax mode, select "Send".
Detailed Discussions of Bit 7
Select whether to send CED signal at the time of manual reception.
Select "Send" when the other party's machine does not start sending although manual reception is executed.
■ SSSW-SW05
Functional Construction
Bit
0
Not used
1
To execute mm/inch conversion (text mode).
2
Not used
3
To send bit 33 or later of DIS signal.
4
Record paper length to be declared by DIS signal
5
Not used
6
Not used
7
Not used
Detailed Discussions of Bit 1
Execute mm/inch conversion for the image scanned in text mode.
Detailed Discussions of Bit 3
Select whether to send bit 33 or later of DIS signal.
CAUTION:
If "Prohibit" is selected, the super-fine reception from other brand printers or memory box function will be disabled.
Detailed Discussions of Bit 4
Select whether the paper to be declared by DIS signal is a cut paper.
Select "A4/B4 size" if dividing the original at the sending machine side at the time of receiving a long original.
NOTE:
Depending on the model of sending machine, long originals may not be divided.
Function
24
5. Service Mode
1
-
Yes
-
Prohibit
Do not prohibit
A4/B4 size
Any size
-
-
-
0
-
No
-
-
-
-
Advertisement
Table of Contents
