Pre-Checks; Product Name; Points To Note At Installation; Installation Outline Drawing - Canon Cassette Feeding Unit-AP1 Service Manual

Pre-checks

Product Name

Safety regulations require the product's name to be
registered. In some regions where this product is sold, the
following name may be registered instead.
• F326212

Points to Note at Installation

NOTE:
Although pictures or illustrations used for explanation may
differ from the actual things, the procedure is the same.
CAUTION:
Marked portion
When tightening the screws, do not tighten them too
tightly. Otherwise, there is a risk of damage and
deformation of screw holes.

Installation Outline Drawing

Check Items when Turning
OFF the Main Power
Check that the main power switch is OFF.
1. Turn OFF the main power switch of the host
machine.
2. Be sure that Control Panel Display and Main Power
Lamp are both turned OFF, and then disconnect the
power plug.

Unpacking

1.
CAUTION:
• Hold the left and right of the equipment when
taking it out.
• Do not hold the front and rear because the
cassette may be damaged.
32
6. Installation