Table of Contents
Advertisement
Detailed Discussions of Bit 7
Set whether to set vertical scanning prioritized recording.
Set:
If B4 recording paper and A4 recording paper are set and an A4 extra-long image (*) is received, printing will be on the B4
recording paper.
Do not set:
If B5 horizontal recording paper and A4 recording paper are set and a B4 image is received, printing will be by division and
on B5 horizontal recording paper.
*: Image B4 or shorter and that cannot be printed on A4 recording paper.
■ SSSW-SW06
Functional Construction
Bit
0
Not used
1
Not used
2
Not used
3
Not used
4
Not used
5
Reduced printing from A4 to B5
6
Not used
7
Not used
Detailed Discussions of Bit 5
Set whether to execute the reduction print that forcibly reduces the received A4 size document into the B5 size.
This function is invalid when outputting the report.
Setting of Numeric Parameter (NUMERIC Param.)
■ Numerical Parameter Composition
No.
01
Missing areas of printing
image when receiving im-
age with longer length
than standard
04
Leading edge blank area
05
Trailing edge blank area
<001: printing upon reception of extra-length image>
Use it to set the range of the image to be removed from when printing an extra-length received image.
Lower the parameter to decrease the range if the trailing edge of the received image must be retained (as when it is longer than
the effective recording length).
<004: leading edge margin>
Use it to set the leading-edge margin for the effective recording length.
<005: trailing edge margin>
Use it to set the trailing-edge margin for the effective recording length.
Function
Function
Setting range
0 to 9999
0 to 9999
0 to 9999
Initial setting
12
3
3
40
5. Service Mode
1
0
-
-
-
-
-
-
-
-
-
-
Enable
Disable
-
-
-
-
Unit
1 mm
1 mm
1 mm
Advertisement
Table of Contents
