Canon Super G3 FAX Board-AS Service Manual page 65

NOTE:
This step is only for USA and Taiwan.
17. Affix the following FAX Approval Label.
18. Affix the appropriate Modular Label to the place
shown in the figure.
NOTE:
This step is only for Europe.
Do not connect the Telephone Cord (2 contact type)
with the PTT Plug.
19. Connect the PTT Plug matched the field or area to
the PTT Cable (6 contact type).
1x
20. Connect the end of the PTT Cable or Telephone Cord
to the modular jack on the Host machine, and
connect the other end to the modular jack on the
wall.
21. Connect the Power Plug to the outlet.
60
6. Installation
1x