Run Analogue Output Test - Prosense Safevader Series User Manual

select Relay option. Screen will display three options to test as there are three relays on relay
module. Select the menu option related to desired relay test and press Enter key.
If fault relay test selected, detector will activate the relay and screen will display information:
If alarm relay selected, detector will activate related alarm relay and screen will display
information:
To return back to previous screen please press Enter key till the screen updated with previous
menu items.

Run Analogue Output test

To test analogue output level user can initiate the analogue output test in Test menu. Once
Analogue Output option selected press Enter Key. Screen will display the analogue output level.
User can increase or decrease the output signal level via using up and down keys.
To return back from Analogue Output test please press Enter key till the screen updated with
previous menu items.
PRS-UM-SV-EN-Rev1.0-16.12.2022
1. Fault Relay
2. Alarm 1 Relay
3. Alarm 2 Relay
4. Previous Menu
Fault Relay
is active
Alarm 1 Relay
is active
Analog Output
02.0 mA
Page 30 / 41