Change Password - Prosense Safevader Series User Manual

Change password

User must change the defaut password for security reasons. The default password is 1234. To
change password select Password menu item via using up and down keys and press Enter key.
Display will ask new password:
New Password
0
Password must be 4 digits and should be set digit by digit via using up and down keys. When
completed, press Enter key long enough to confirm. The display will show "Successful" message
and return back to higher level menu. User should remember the password to perform changes
later on. If user forgets the password, detector should be returned back to Prosense to reset
password. No Field operation is available to reset password at customer site.
PRS-UM-SV-EN-Rev1.0-16.12.2022 Page 27 / 41