System Status - Prosense Safevader Series User Manual

System Status

The Prosense SafeVader detector has a screen to show status messages and measurement
levels online. Also it has three LEDs to show power, fault and alarm status. If equipment is in
normal condition the green power LED will blink with 1 second period and screen will show the
gas that detector measuring, current level of gas detector measuring.
Increase / Up Button
Default display screen is used to show gas level as a text and bar graph, detector state and
subsidiary messages such as fault, alarm 1 or overrange. The detector special state messages
and related LED status for each special state are also shown;
Status
Power-on
Warm-up
Normal
Fault
Calibration
Underrange
Alarm 1
Alarm 2
Overrange
PRS-UM-SV-EN-Rev1.0-16.12.2022
Power LED
Diagram 8: SAFEVADER Series Detector Displya and LEDs
SafeVader Series Visual Indications
Message Power (Green)
Self Test Flashing Green
Warm-up Flashing Green
Normal Flashing Green
Fault Flashing Green
Calibration Flashing Green
Fault Flashing Green
Alarm 1 Flashing Green
Alarm 2 Flashing Green
Overrange Flashing Green
Table4: SafeVader Series visual indications
Fault LED
Alarm LED
Fault (Yellow)
Flashing Yellow
Solid Yellow
Flashing Yellow
Solid Yellow
Flashing Yellow
Display
Decrease / Down Button
Enter / OK Button
Alarm (Red)
Solid Red
Solid Red
Solid Red
Page 16 / 41