Detector Settings; Entering The Menu - Prosense Safevader Series User Manual

Detector Settings

Prosense SAFEVADER detector prepared at factory to work as standalone detector. User may
want to change settings and alarm levels depending of the requirements. SAFEVADER detector
screen can be used to change the detector settings. There are 3 buttons on display to perform
menu operations which are Enter, up (Increase) and down (decrease). If user wants to cancel
any operation on any screen keep pressing on Enter key till the screen return back to previous
screen.

Entering the menu:

To reach configuration menu press Enter. The screen will request password information:
The password is 1234. User need to change the password as defined in "Change password"
step. You need to set values via using up and down keys. Once the value is set press Enter again
to confirm and move to the next digit. Confirmed digits will be made invisible by detector
program:
The screen will display menu options when correct password entered at last digit:
PRS-UM-SV-EN-Rev1.0-16.12.2022
PASSWORD
0
PASSWORD
****
1. Alarm Settings
2. Calibrate
3. Configure
4. Information
5. Test
6. Exit
Page 22 / 41