1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DB3
  6. Installation manual

Directed DIRECTECHS DB3 Installation Manual

For 2023 kia seltos
Hide thumbs Also See for DIRECTECHS DB3:
Table of Contents

Advertisement

Quick Links

Download this manual
Functions compatible with the 2023 Kia Seltos
Arm Factory Security
Brake Status (foot brake)
Control of aftermarket alarm with OEM remote
Disarm Factory Security
Door Lock Control
Door Locks Status
Door Unlock
Driver Priority Unlock
E-Brake Status
Entry Monitoring ALL Door Pins
Entry Monitoring Hood Pin
Entry Monitoring Trunk/Hatch Pin
Factory Alarm Trigger Monitoring
Ignition Status
Immobilizer Bypass-Data No Key Req'd
Parking Lights Control
Remote Start Takeover
SmartStart
Tach / RPM Output
Trunk / Hatch Release
403.HK18
v1.18
2023 Kia Seltos

Advertisement

Table of Contents
loading

Related Manuals for Directed DIRECTECHS DB3

Summary of Contents for Directed DIRECTECHS DB3

  • Page 1 403.HK18 v1.18 2023 Kia Seltos Functions compatible with the 2023 Kia Seltos Arm Factory Security Entry Monitoring Hood Pin Brake Status (foot brake) Entry Monitoring Trunk/Hatch Pin Control of aftermarket alarm with OEM remote Factory Alarm Trigger Monitoring Disarm Factory Security Ignition Status Door Lock Control Immobilizer Bypass-Data No Key Req'd...

  • Page 2: Table Of Contents

    Contents Introduction Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming Module programming for convenience only (skip transponder) Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick Reference Guide...

  • Page 3: Introduction

    DB3 is an all-in-one door lock and override module. Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 4: Pre-Installation And Application Warnings

    [4] OEM Remote: The connection is only required to maintain OEM remote functionality during remote start. The TPMS light will come ON during runtime or idle mode and will go out after vehicle takeover. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 5: Wiring Diagram

    (+) Starter: White, pin 3 52 53 Ignition Interr.: Pink, pin 45 Ignition Switch (black conn.) Accessory Interr.: Orange, pin 55 (MUX) Parking Lights: Blue, pin 14 (+) Ignition: Pink, pin 4 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 6: Locating Components In The Vehicle

    Locating components in the vehicle 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 7: Vehicle Connections

    (-) W2W Only - Trunk Output Remote Starter H2/5 Violet/White Remote Starter (AC) W2W Only - Tach Output An optional connection required on some remote starters, which do not support a tach signal in D2D. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.
  • Page 8 Blue (Data) TX H4/2 Black (-) Ground H4/3 Green (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 No Connection H5/2 No Connection 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.
  • Page 9 Ignition Switch, black 6 pin plug, pin 4 Pink Starter Ignition Switch, black 6 pin plug, pin 3 White Tachometer [2] Driver Kick, black 82 pin plug (EM11), pin 46 Pink 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 10: Module Programming

    The LED turns ON solid green for 3 seconds, then turns OFF. Turn the key to OFF and remove it from the ignition barrel. You have successfully completed the module programming sequence. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 11: Module Programming For Convenience Only (Skip Transponder)

    Turn the ignition ON and wait until the LED turns OFF. START Key OUT Turn ignition OFF and remove the key from the ignition barrel. START You have successfully completed the module programming sequence. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 12: Connecting The Module

    4-pin D2D harness. (12-pin) (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 13: Led Diagnostics And Troubleshooting

    External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.
  • Page 14 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 15: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the LED starts & to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Solid Release 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 16: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 17: Feature And Option List

    Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the 2. Safelock beginning of the sequence, and relock after start and shutdown. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 18: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

  • Page 19: Quick Reference Guide

    Press & hold for 1 second to remote start. * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.
  • Page 20 Notes 403.HK18 1.18 2023 Kia Seltos ©2023 Directed. All rights reserved.

Table of Contents