Disclaimer - ROLEC Sinexcel ULTRACHARGE 160 Installation & Operation Manual

Disclaimer

Rolec shall not be liable for personal injury, product damage, failure or defects in
scenarios such as but not limited to:
Installation and/or maintenance performed by unlicensed/unqualified personnel.
Lack of appropriate maintenance in accordance with the maintenance manual.
Lack of appropriate maintenance in accordance with local specifications and
standards.
Failure to adequately record maintenance activities.
Unauthorised changes to the design and/or functionality of the product.
Product damage or failure caused intentionally or by negligence.
Product damage or failure caused by improper/negligent actions performed by
Installation and/or maintenance personnel.
Product damage or failure caused by 'force majeure' (such as a bad weather,
natural disasters, etc.).
Maintenance personnel not wearing appropriate protective equipment.
The failure (when requested) to return failed components to the
manufacturer/supplier for analysis.
WARNING: Personal Injury and Equipment Damage
Before maintenance, make sure the power supply to the charger has been
switched OFF.
Make sure any faults have been eliminated and the electric circuit has been
connected properly before initiating a power on test.
Personnel who maintain the equipment, including operators, trained personnel
and professional must, where required, possess the local national qualifications to
work with high-voltages, work at heights, and to work in operations of special
equipment.
EVUCM-001-V01R1 Installation and Operation Manual
October 2023
Disclaimer
UltraCharge 160 DC Charger
Page 4 of 30