Safety; Safety Advice Within This Manual - ROLEC Sinexcel ULTRACHARGE 160 Installation & Operation Manual

Safety

Safety
This manual is specifically applicable to the UltraCharge 160 DC Charger and is provided
as a guide to its installation.
IMPORTANT: Engineers must read and understand the content of this manual
before installation and/or use of the product.
Engineers must be properly qualified and competent to do work on the equipment in
accordance with the current legislation applicable in the geographical region of the
installation.
Rolec Services Ltd cannot accept any responsibility for improper actions performed
by engineers or end users.
The information provided in this manual must ONLY be used with the model(s) listed on
page 1 of this manual.
The information provided in this manual must NOT be used with any other product.
The content of this manual may be updated by the manufacturer as required.
Do NOT use the equipment for anything other than its intended purpose.
Do NOT modify the equipment unless specifically instructed to do so by the
manufacturer.
Do NOT attempt to repair the equipment unless specifically instructed to do so by the
manufacturer.
To maintain electrical safety, the body enclosure of the product (access covers) must
be secured in their correct location using the supplied fasteners and the seal must be
sufficient to maintain the IP rating of the enclosure.
Fasteners used to mount the product in its working location must be sufficient for the
task and the specific mounting point.
Damage to the product may render it unsafe. The product must be electrically
isolated and NOT used until appropriate remedial action has been performed.
Rolec does NOT recommend the use of charging extension cables or adapters and
their use may invalidate the charge point warranty.

Safety Advice Within this Manual

Rolec manuals use a system of warnings, cautions and notes.
WARNINGS concern the safety of installers/end user and will be given before the
detail/instructions in the manual.
CAUTIONS concern the potential for damage to the equipment and will be given
before the detail/instructions in the manual.
NOTES are given to provide additional information and/or to highlight information of
importance. They will be given either before or after the detail/instructions as
appropriate and may use different wording (such as IMPORTANT) where emphasis is
required.
Warnings, Cautions and Notes may be repeated several times as appropriate and may
be preceded by a hazard symbol where appropriate.
UltraCharge 160 DC Charger
Page 3 of 30
EVUCM-001-V01R1 Installation and Operation Manual
October 2023