Table of Contents
Advertisement
QUANTUM:EV
EV OPENCHARGE
(GPRS/Ethernet Communication)
INSTALLATION
& OPERATION
MANUAL
MODELS:
SINGLE PHASE
OCPP0410
1 X 3.6kW
OCPP0411
1 X 7.2kW
OCPP0420
2 X 3.6kW
OCPP0421
2 X 7.2kW
3 PHASE
OCPP0412
1 X 11kW
OCPP0413
1 X 22kW
OCPP0422
2 X 11kW
OCPP0423
2 X 22kW
Installation & Operation Manual - EVQROCM-01-V01-R0
Ver:1.00 Rev:0 September 2020
Advertisement
Table of Contents
Related Manuals for ROLEC OCPP0410
Summary of Contents for ROLEC OCPP0410
- Page 1 QUANTUM:EV EV OPENCHARGE (GPRS/Ethernet Communication) INSTALLATION & OPERATION MANUAL MODELS: SINGLE PHASE OCPP0410 1 X 3.6kW OCPP0411 1 X 7.2kW OCPP0420 2 X 3.6kW OCPP0421 2 X 7.2kW 3 PHASE OCPP0412 1 X 11kW OCPP0413 1 X 22kW OCPP0422 2 X 11kW...
- Page 2 Date Published: September 2020 Rolec Services Ltd are the publishers of this document and own the rights to use the text, images and all technical content contained within. Content supplied by third parties / partner organisations remains the property of that organisation and is used by agreement with the supplier.
-
Page 3: Table Of Contents
RFID Activation Maintenance Charger Maintenance Rolec Support For assistance with the installation or operation of this product, contact Rolec Technical Support. Please have the details of the product available so we can attend to your query appropriately: +44 (0) 1205 724754 technicalsupport@rolecserv.co.uk... -
Page 4: Safety
If the advice in this manual is not understood, contact Rolec for further advice and/or training BEFORE attempting installation/operation of the equipment. -
Page 5: Safety Advice Within This Manual
Product Overview Safety Advice within this Manual Rolec manuals use a system of warnings, cautions and notes. WARNINGS concern the safety of installers/end user and will be given before the detail/instructions in the manual. CAUTIONS concern the potential for damage to the equipment and will be given before the detail/instructions in the manual. -
Page 6: Product Specification
Product Specification Product Specification Physical Specification Dimensions 1440 x 375 x 275mm (HxWxD) Chassis – 2.5mm, 6063 extruded aluminium with 25μm anodised finish. Materials Panels – 3.2mm Aluminium composite. LED lens – Impact resistant 3mm Polycarbonate. Base – Impact resistant, 5mm polycarbonate. Mass <... -
Page 7: Electrical Specification
Options and Accessories Electrical Specification Product Code OCPP0410 OCPP0411 OCPP0420 OCPP0421 Rated Output 1 x 3.6kW 1 x 7.2kW 2 x 3.6kW 2 x 7.2kW Input Voltage 230VAC / 50Hz (Single Phase) Product Code OCPP0412 OCPP0410 OCPP0422 OCPP0423 Rated Output... -
Page 8: Unpacking
Options and Accessories Options and Accessories RFID cards/fobs EV charging cables ‘Type 1 to Type 2’ or ‘Type 2 to Type 2’ as required. Load management System (electrical distribution management via optional software). Protection barriers & charge point signage. Galvanised steel ground mounting base. Remote mounted GPRS signal antenna. -
Page 9: Labelling
Labelling Labelling Installers must observe any/all warning labels displayed on the equipment or inside the equipment enclosure. Labels may be in the form of adhesive ‘stickers’, plates, and/or moulded into the surface of components. Information Labels Figure 2 Typical Product / Rating Label Figure 3 Front Facia Label Figure 5 Electricity Warning Label (as appropriate) Figure 4 Socket QR Code Label... -
Page 10: Installation
Advice provided in this manual does NOT override any legislation. If the advice in this manual is not understood, contact Rolec for further advice and/or training BEFORE attempting installation/operation of the equipment. Rolec Services Ltd cannot accept any responsibility for improper installation or any problems arising from improper installation. -
Page 11: Schematics
Installation Schematics Applicable to Single Phase models: OCPP0410 OCPP0411 LED DRIVER Figure 7 Single Socket Single Phase Quantum OCPP – Schematic EVQROCM-01-V01-R0 Installation and Operation Manual Quantum:EV OpenCharge Page 11 of 21 September 2020... - Page 12 Installation Applicable to Single Phase models: OCPP0420 OCPP0421 LED Driver AC-N (BLUE) DC V- (Rlack) Co nstan t Cur r en t Cla s s 2 Po we r Su p ply Mo del: L D010H-CU03536-51 Inp ut: 100-240Vac ~ 0.25A 50/60Hz Ou tpu t: 25-36Vdc 350mA AC-L (Brown) DC V+ (Red)
- Page 13 Installation Applicable to Three Phase models: OCPP0412 OCPP0413 LED DRIVER Figure 9 Single Socket Three Phase Quantum OCPP – Schematic EVQROCM-01-V01-R0 Installation and Operation Manual Quantum:EV OpenCharge Page 13 of 21 September 2020...
- Page 14 Installation Applicable to Three Phase models: OCPP0422 OCPP0423 LED Driver AC-N (BLUE) DC V- (Rlack) Con s ta n t Curre nt Cla s s 2 Po we r Su p ply Mo del: L D010H-CU03536-51 Inp ut: 100-240Vac ~ 0.25A 50/60Hz Ou tpu t: 25-36Vdc 350mA AC-L (Brown) DC V+ (Red)
-
Page 15: Before Installation
It is assumed that a suitable GPRS signal has already been verified by the end user/installer prior to installation. Rolec cannot be held responsible or accountable in the event a GPRS unit is installed in a location without adequate network signal. -
Page 16: Installation Procedure
Commissioning 8. Secure the chassis to the ground with the correct fasteners for the location. 9. Trim around the pedestal base to remove any excess rubber from the splash mat. NOTE: All electrical work must be performed in accordance with the current Electrical Wiring Regulations. -
Page 17: Commissioning
Commissioning 8. Secure the chassis to the ground with the correct fasteners for the location. 9. Trim around the pedestal base to remove any excess rubber from the splash mat. NOTE: All electrical work must be performed in accordance with the current Electrical Wiring Regulations. -
Page 18: After Installation
After Installation 2. To complete commissioning, refer to the Installer’s Guide on the pages after this installation manual. 3. Once commissioning is complete, the Host will receive an invitation from EVCharge.Online to set up their Back Office and to take part in a walkthrough of the system. -
Page 19: Rfid Activation
Operation EVCharge.Online Driver application. Go to your Profile, then select the RFID option, Add New RFID+. Follow the on-screen instructions to add the card/fob. Once a card/fob is registered on the system at one charge point, the same cards/fobs will function with all charge points within the same management group, unless restricted by the Host. -
Page 20: Maintenance
NOTE: In the event of a hardware issue, always contact your installer first. If damage has been sustained to communications devices and/or other ‘Smart’ components, it is recommended that an approved Rolec installer is called to perform the repair. Damage caused to the equipment by misuse, lack of maintenance, inappropriate maintenance or modification is not covered by the manufacturer warranty. - Page 21 Maintenance Intentionally Blank EVQROCM-01-V01-R0 Installation and Operation Manual Quantum:EV OpenCharge Page 21 of 21 September 2020...
- Page 22 HOST’S GUIDE Getting Connected To onboard your Rolec charging points to the EV CHARGE.ONLINE system simply follow the following steps: 1. PURCHASE YOUR CHOSEN PLAN 2. BOOK YOUR INSTALLATION Contact your chosen Installer to arrange a For each project you will need to: suitable date to install your charging points.
- Page 23 Client how this can be done during the handover process. Rolec equipment is covered by a parts warranty, however we recommend that you consider offering a service support agreement to your Client to ensure they have appropriate cover for all potential call out eventualities.
- Page 24 EV DRIVER APP USER GUIDE...
- Page 25 Finding Your Charging Point Download The App or Go To EVCharge.Online Use the map to find a Use th charging location. charg • • Choose from either map or list view. Choo Good Afternoon Lucy Good Afterno • • Create an account to view, sort & save Creat UKEVXXXX , Place UKEVXXXX...
- Page 26 Starting Your Charging Session Scan the QR code using your smartphone’s camera. • The QR code can be found next to the START A CHARGE START A C H AR charging socket. UKEV0432 UKEV0432 • Alternatively you can enter the socket ID number via the app.
- Page 27 Ending Your Charging Session You can end your charging You c by either: by eit • • ‘End charging session’ in the app. ‘End UKEV0432 UKEV0432 • • Unplugging the charging cable from the Unplu vehicle. vehic • • If you have restricted your charging If you session to ‘kWh required’...
- Page 28 Additional Features My Favourites • Save & sort your saved favourite charging locations. STATISTICS STATISTICS Charge Sessions Last 30 Days 30 D 3 0 D • View all of your current and past charging session information. Statistics & Analytics • Understand your EV charging activity/behaviour.
- Page 29 Reporting A Faulty Chargepoint How to report a fault • In the unlikely event that a fault does occur, the chargepoint’s LED status indicator will flash red. • You can report the fault to our customer service team via the app. There is also the option to attach a photo of the issue your are experiencing with the...
- Page 32 THE UK’S LEADING MANUFACTURER OF EV CHARGING POINTS Head office contact: @ @ RolecEV t: +44 (0) 1205 724754 www.rolecserv.com f: +44 (0) 1205 724876 rolec@rolecserv.co.uk...
Need help?
Do you have a question about the OCPP0410 and is the answer not in the manual?
Questions and answers