To Set Up The Sf Unit To Receive Data; Sending Data; About Data Transfer Types; To Send Ail Data Items - Casio SF-4400 Owner's Manual

PART 7 Data Communications
Bay
Setting Up for Data Communications
one
- ' P i Card Library or To Do list)
To set up the SF Unit to receive data
2
Some SF Units have modes (such as a Business
1, While an initia! screen is displayed, press FUNC twice to display the second neti included with this unit, Data trom such modes canno! ss
funebenments
.
oe Schedule Keeper of some SF Units is capable of storing multipie-date
* Youcan perform the above operation while the intial screen of the Telephone data items. Whenever you transfer such a data item to the SF Unit, it is
Directory, Memo Mode, Schedule Keeper, Calendar, Reminderis displayed. ie d ingle-date data item. The date used is the one
« ff you want the received data to be stored in the secret area, you should Se iseal mtipie- cate data item.
also enter the secret area at this point. If you are in the open area on the
°
ff an alarm (Daily Alarm, Schedule Alarm or Reminder Alarm) is reached
2
ioceng unt Hee eee into the open:ares.
while data is being received, the alacm does not sound until the data receive
res: a % A y
i eration is complete. ia
3. Press 2 to select RECEIVE. . Some SF Unit models have a mark protection feature to protect against
:
accidental erasure of data.
This unit does not feature mark protection,
RECEIVE
OK
50 such data is received by disregarding the mark protection.
5 4 and y
ATR to stop
f=) PRESSCESC>
oa g
* This message indicates that the receive unit is standing by for data. Perform
the required procedures to start sending data from another SF Unit (see
owners manual for details) or a personal computer (see the interface Unit
manual for details).
+ To abort the receive operation at any time, press ESC.
+ This procedure is the same regardless of whether the data is received from '
another SF Unit or from a personal computer. j f
4. The display changes to the following once the SF Unit starts receiving data. - i
RECEIU
tan RECEE ING {Receive data
TO STOP item count 1
fe PRESSCESC) r
a
«@ The number of data items received is counted on the display. x
+ If an error occurs during the receive operation, the message "TRANSMIT
ERROR!" appears on the display. Press ESC to clear the error message.
» Received data is added to the data already stored in memory. If the memory
becomes full during the receive operation, the message "MEMORY FULL!"
appears and data transfer stops. Press ESC to clear the error message.
81
80 j
Bac a asc eae ca
; rs Data
PART 7 Data Communications : Sending Data sv:
Si
82
Sending Data
r~ About data transfer types....
There are a number of different ways you can transfer data.
+ One Data Item
* Mode Data Items
+ Month Data
This method lets you send the highlight data for a specific month,
* All Data items
Note
+ If an alarm (Daily Alarm, Schedule Alarm or Reminder Alarm) is reached
i
To send all data items
or secret) before proceeding.
Press 4 to select DATA COMM.
Press 1 to select SEND.
sending anything.
WEon
Corey SENDING
DATA
=>
GS
TO STOP
PRESSCESC>
83