To Set Up The Sf Unit To Receive Data - Casio SF-4900ER User Manual

To set up the SF Unit to receive data

1. While an initial screen is displayed, press
function menu.
You can perform the above operation while the initial screen of the Telephone
Directory, Memo Mode, Schedule Keeper, To Do Mode, Calendar or Re-
minder is displayed.
In the Expense Mode, you should press
If you want the received data to be stored in the secret memory area, you
should also enter the secret memory area at this point. If you are in the open
memory area on the receiving unit, received data is stored into the open
memory area.
2. Press to select DATA COMM.
4
3. Press to select RECEIVE.
2
This message indicates that the receive unit is standing by for data. Perform
the required procedures to start sending data from another SF Unit, a CSF
Unit, an NX Unit (see manual for details) or a personal computer (see the
Interface Unit manual for details).
To abort the receive operation at any time, press
This procedure is the same regardless of whether the data is received from
another SF Unit, a CSF Unit, an NX Unit or from a personal computer.
4. The display changes to the following once the SF Unit starts receiving data.
The number of data items received is counted on the display.
If an error occurs during the receive operation, the message "TRANSMIT
ERROR!" appears on the display. Press
Received data is added to the data already stored in memory. If the memory
becomes full during the receive operation, the message "MEMORY FULL!"
appears and data transfer stops. Press
Setting Up for Data Communications
twice to display the second
FUNC
three times.
FUNC
.
ESC
Receive data
item count
to clear the error message.
ESC
to clear the error message.
ESC
99