Keba KeContact P30 c Series Installation And Configuration Manual
Hide thumbs
Also See for KeContact P30 c Series:
- Programmer's manual (17 pages) ,
- Functions & procedures (112 pages) ,
- Translation of the original instructions (28 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Keba KeContact P30 c Series
Summary of Contents for Keba KeContact P30 c Series
- Page 1 Installation and Configuration Manual — KEBA KeContact P30 c-series Version:2023.3.1...
- Page 2 5.1. List of illustrations ................ Installation and Configuration Manual — KEBA KeContact P30 c-series 1 / 11...
- Page 3 1. Introduction 1. Introduction Dear customer, Thank you for choosing the "Installation and Configuration Manual — KEBA KeContact P30 c-series". You are welcome to send us your suggestions so that we can further improve the quality of our products. 2 / 11 Installation and Configuration Manual — KEBA KeContact P30 c-series...
- Page 4 • 11 kW or 22 kW with integrated 4 meter connection cable and type 2 plug or • 22 kW with type 2 socket, for connecting your own cable • Installation instructions - Type 2 charging station KEBA 11/22 kW 4m/socket 2.2. Prerequisites The following is required to use the charging station: •...
- Page 5 3. Commissioning 3. Commissioning To install the KEBA charging station, please follow the instructions in the "KeContact KC-P30 Charging station installation manual". Here This quick guide refers to the original user manual. It serves as an installation aid for qualified electricians in the area of communication interfaces, but is not a substitute for studying the user manual.
- Page 6 To be able to access the wallbox via its IP address for testing purposes, your computer must be in the same network. Open an internet browser and enter the IP address identified. Example: "http://123.123.123.123" Installation and Configuration Manual — KEBA KeContact P30 c-series 5 / 11 Version:2023.3.1...
- Page 7 After entering your login data (included in the scope of delivery), a website opens that looks like this: Figure 4. KEBA software The web interface of the KEBA c-series provides access to status information, e. g. the total energy charged. This web interface can only be used for reading, no configurations or settings can be made here.
- Page 8 DIP switches D1.6 - D1.8 are used to set the permissible current, which determines the maximum charging power of the charging station, provided the vehicle to be charged supports this charging power. Installation and Configuration Manual — KEBA KeContact P30 c-series 7 / 11...
- Page 9 3.2.3. Charging network The Keba KeContact P30 c-series can be used as a slave in a charging network with a Keba KeContact P30 x- series. In this case, the x-series takes over the management of the RFID authorization. To enable communication between the charging stations, the DIP switch D2.5 must be activated on all charging stations (x-series and c-...
- Page 10 Charging network (D2.5) Current (D1.6-D1.8) 32 A SmartHome interface via UDP (D1.3) Figure 8. Default settings of the DIP switches for a charging network The configuration is now complete. Installation and Configuration Manual — KEBA KeContact P30 c-series 9 / 11 Version:2023.3.1...
- Page 11 4. Contact 4. Contact For support, please contact: FENECON GmbH Gewerbepark 6 94547 Iggensbach Phone — Service: +49 (0) 9903 6280 0 E-Mail — Service: service@fenecon.de 10 / 11 Installation and Configuration Manual — KEBA KeContact P30 c-series Version:2023.3.1...
- Page 12 Figure 4. KEBA software Figure 5. DIP switch Figure 6. DIP switch DSW Figure 7. Setting the amperage Figure 8. Default settings of the DIP switches for a charging network Installation and Configuration Manual — KEBA KeContact P30 c-series 11 / 11 Version:2023.3.1...
Need help?
Do you have a question about the KeContact P30 c Series and is the answer not in the manual?
Questions and answers