Keba KeContact x Series Configuration Manual
Hide thumbs
Also See for KeContact x Series:
- Configuration manual (42 pages) ,
- Installation manual (72 pages)
Subscribe to Our Youtube Channel
Related Manuals for Keba KeContact x Series
Summary of Contents for Keba KeContact x Series
- Page 1 KeContact P30 x-series Charging Station Configuration manual V 4.18 Translation of the original instructions...
- Page 2 Specifications are subject to change due to further technical developments. Details presented may be subject to correction. All rights reserved. Reindlstraße 51, 4040 Linz, Austria, www.keba.com/emobility KEBA Energy Automation GmbH +43 732 7090-0, +43 732 7309-10, kecontact@keba.com For information about KEBA and our subsidiaries please look at www.keba.com.
-
Page 3: Table Of Contents
OCPP backend ....................Smart Home Interface..................Integration of external meters ................PV optimized charging ..................Short description of the eMobility app ..............Short description of the eMobility portal ..............Maintenance....................... Diagnosis and troubleshooting................. Software update....................Index ........................... V4.18 © KEBA 2021... -
Page 4: Introduction
Caution Means that damage to property can occur if the corresponding safety mea- sures are not taken. This symbol reminds you of the possible consequences of touching electro- statically sensitive components. V4.18 © KEBA 2021... -
Page 5: Purpose Of The Document
● the displays and operating elements of the charging station, ● basics of network technology, ● basics of IT, ● diagnostic options, ● systematic fault analysis and rectification, ● the setting options on the charging station. V4.18 © KEBA 2021... -
Page 6: Warranty
Introduction P30 x-series Warranty Only general maintenance work that is expressly permitted by KEBA may be performed. Any other tampering to the device will result in a loss of the war- ranty claim. WARNING! Risk of electric shock and fire hazard! After the front part has been opened, product safety can no longer be guar- anteed. -
Page 7: Notes On This Document
Designation Target group ● End customer P30 operating instructions ● Electricians P30 installation manual ● Electricians UDP Programmer's Guide ● Programmer Modbus TCP Programmers Guide ● Programmer ● End customer ● Electricians ● Service technicians V4.18 © KEBA 2021... -
Page 8: System Overview
(master charging station) provides and how to set up a master/client network. Network interfaces The KeContact P30 x-series provides the following network interfaces (e.g. for connection to an OCPP backend, etc.): ● ● WLAN (optional) ● WLAN access point (optional) ● Mobile communications (optional) V4.18 © KEBA 2021... - Page 9 ® The Ethernet1 connection X4 is designed as a terminal block in LSA+ tech- nology. It is recommended to implement hard-wired communication (e.g. for ® SmartHome or a charging network) at the LSA+ connection. V4.18 © KEBA 2021...
- Page 10 Only a charging station that is operated as a single charging station can be connected to the router via WLAN. A charging station that is part of a charging network (master/client network) must always be connected to the router via LAN. V4.18 © KEBA 2021...
- Page 11 OCPP backend over the cellular network. The mobile communications provider may charge additional fees (depending on the tariff) for running data transmissions..KeContact P30 x-series ... OCPP backend V4.18 © KEBA 2021...
-
Page 12: Design Of A Local Charging Network (Master/Client)
| blue | blue | - The OCPP backend is not reachable or missing. Communication between master and client charging stations is not possible. - | blue | blue | - The OCPP backend is not reachable. V4.18 © KEBA 2021... - Page 13 The connection of the charging station to the router/switch is made via LAN. Fig. 2-4: Connection via router or switch ... Router/Switch ... KeContact P30 x-series (master) ... P30 c-series (client) V4.18 © KEBA 2021...
- Page 14 (Master/Client) Multicast DNS based service (Zero- Within the network (Multi- 5353 conf) to find wallboxes in the net- cast) work (Master/Client) Dynamic Host Configuration Proto- Within the network col (DHCP) for automatic network (Broadcast) configuration (Master/Client) V4.18 © KEBA 2021...
- Page 15 Communication protocol to be able Within the network to find wallboxes in the network (Broadcast) (Master/Client) Secure Shell for Advanced Debug- External Access ging (Master) Within the network Communication protocol for the (Broadcast) firmware download (Master) V4.18 © KEBA 2021...
-
Page 16: Configuration
OFF The DIP switches are located under the connection panel cover. The follow- ing figure shows only the affected DIP switches, others are not shown. The following setting must be made on the DIP switch DSW2: V4.18 © KEBA 2021... -
Page 17: Enabling The Dhcp Server
● Import configuration 3.3.1 Read out configuration To read out the configuration, proceed as follows: 1) Connect the USB stick to the KeContact P30 x-series. The KeContact P30 x-series must be operationally ready and already configured. V4.18 © KEBA 2021... - Page 18 The configuration file is adapted. 3.3.3 Import configuration To import the configuration into another KeContact P30 x-series, the USB stick must be plugged in to the desired charging station. The configuration will be imported automatically and adopted after a restart. V4.18 © KEBA 2021...
-
Page 19: Configuration In Series Via Usb Stick
To read out the configuration, proceed as follows: 1) Connect the USB stick to the KeContact P30 x-series. The KeContact P30 x-series must be operationally ready and already configured. 2) The transfer of the configuration starts automatically. V4.18 © KEBA 2021... - Page 20 . The number of available charging sta- AmountConnectors=[x] tions in the charging network must be entered as the value. 3) Delete the following entries: ChargeBoxIdentity Connect2Connec- torSerial HOTSPOT_SSID HOTSPOT_KEY 4) Save the file and close. The configuration file is adapted. V4.18 © KEBA 2021...
- Page 21 3.4.4 Import configuration To import the configuration into another KeContact P30 x-series, the USB stick must be plugged in to the desired charging station. The configuration will be imported automatically and adopted after a restart. V4.18 © KEBA 2021...
-
Page 22: Web Interface
The configuration label is in a pouch affixed to the installation materials. For security reasons, change the password after the initial login. In doing so, observe the password guidelines, refer to „4.2 User menu“. V4.18 © KEBA 2021... - Page 23 The following chapters provide an overview of the possibilities of the web in- terface. A detailed description of the individual configuration options can be found directly in the web interface next to the respective configuration entry. V4.18 © KEBA 2021...
-
Page 24: Main Menu
4.1.2 Charging sessions This page displays details about the charging sessions of the last 90 days. The "Export" button lets you export the charging sessions of the selected pe- riod as file. *.csv V4.18 © KEBA 2021... - Page 25 The 1-phase/3-phase switching and thus optimized use of PV power with the KeContact S10 is activated here. Chargepoint parameters Here it is determined whether the charging station is operated as a single charging station or as a master charging station in a charging network. V4.18 © KEBA 2021...
- Page 26 The currently installed software versions are displayed. A software update can also be performed here. Mobile communications information Information on the mobile network connection is displayed and it is possible to test whether there is a connection to the selected mobile network. V4.18 © KEBA 2021...
- Page 27 Restart system The master can be restarted with this button. 4.1.6 Configuration The configuration of the charging station is carried out in this area. The area offers the following options: ● Device ● Network connection ● Routing V4.18 © KEBA 2021...
- Page 28 Direct payment feature This feature allows this device to be used as part of a payment solution in public and semi-public spaces. This function requires the KEBA Payment Terminal as well as charging stations certified in accordance with the Ger- man Measures and Verification Act.
- Page 29 The displayed configuration options vary depending on the selected transmission type (SOAP oder JSON). If a connection to the KEBA eMobility Portal is established via the KEBA eMobility App no settings need to be made here. If the settings are changed on the webinterface, those of the KEBA eMobility App are overwritten.
- Page 30 These abbreviations are reserved for in- dicating transmitted energy. If either "Wh" or "kWh" are entered as display text anyway, this text is ignored and not shown on the display. V4.18 © KEBA 2021...
-
Page 31: User Menu
Recovery key If you forget the web interface password, you can reset it using the displayed recovery key. The recovery key can also be found on the configuration label. V4.18 © KEBA 2021... - Page 32 Web interface P30 x-series Information It is essential to keep the recovery key in a secure place for the entire life of the product! V4.18 © KEBA 2021...
-
Page 33: Functions
Current limiting The current limiting for the charging station can be regulated in various ways. ● Setting by means of DIP switches locally on each charging station ● Assignment by the master ● Assignment via UDP connection V4.18 © KEBA 2021... - Page 34 The charging station verifies how many phases a vehicle is charging and de- tects whether the vehicle is one that charges with 1, 2 or 3 phases. This information is ultimately used to regulate the uniform charging current distribution to the 3 phases. V4.18 © KEBA 2021...
-
Page 35: Rfid Authorization
No comparison is made to the RFID cards stored at the OCPP backend. Offline authorization mode This defines how an authorization request is handled if the connection to the higher-level OCPP backend fails. V4.18 © KEBA 2021... - Page 36 "accepted card". This text can be customized via the web interface. 5.2.3 RFID authorization without OCPP backend connection The following options are available for managing RFID cards: ● At the RFID reader of the charging station ● In the web interface V4.18 © KEBA 2021...
- Page 37 Beschreibung Name of the Card Name of the RFID card. RFID Card – Serial number (UID) of the RFID card. Serial No. (UID) Expiry Date Date up to which the RFID card is to be valid. V4.18 © KEBA 2021...
- Page 38 RFID card has been accepted. The charging process can now be started. 4) If necessary, the charging process can be stopped prematurely by hold- ing the same RFID card in front of the RFID reader again. V4.18 © KEBA 2021...
- Page 39 If this function has been activated in the DIP switch settings, enabling a charging session will additionally require a correct signal on the enable input X1. Further informa- tion can be found in the "Installation Manual". V4.18 © KEBA 2021...
-
Page 40: Ocpp Backend
Access to external (outgo- Port at which the OCPP backend Custom ing) can be reached. Port for the time server of the Incoming and outgoing charging station. Supported messages The following table provides an overview of the supported messages. V4.18 © KEBA 2021... -
Page 41: Smart Home Interface
Smart Home Interface The charging station gives you the option to transmit information and receive commands via the User Datagram Protocol (UDP) or via Modbus TCP. For instance, this can be used for integration into a smart home. V4.18 © KEBA 2021... -
Page 42: Integration Of External Meters
This ensures that the domestic connection safety device is not overloaded, and that it is not al- ways necessary to select a lower charging capacity than would be possible with the vehicle and the installation. V4.18 © KEBA 2021... - Page 43 Smart Meter TS 65A via Fronius 502 / 200 Symo GEN24 Fronius DataManager 502 / 240 Gossen Metrawatt EM228X see manufacturer manual Gossen Metrawatt EM238X see manufacturer manual KOSTAL Smart Energy Meter see manufacturer manual V4.18 © KEBA 2021...
- Page 44 If "0" is entered or if the field remains empty, the charging processes are in- terrupted in the event that the connection to the external meter is interrupted. V4.18 © KEBA 2021...
-
Page 45: Pv Optimized Charging
o f the existing energy meter can be read via the inverter. The configuration settings are made via the web interface (menu "External TCP Counter") or in the KEBA eMobility App. Configuration Energy meter / Fronius inverter... - Page 46 Communication channel: Select "CPM Profiles". The DIP switches 1.2 (OFF) and 1.3 (ON) of the charging station must be set correctly and the change in setting must be applied by restarting (pressing the service button). V4.18 © KEBA 2021...
-
Page 47: Short Description Of The Emobility App
Short description of the eMobility app Short description of the eMobility app The KEBA eMobility App is an extended user interface for the charging sta- tion and is available for compatible KeContact P30 x-series device variants (for details see http://www.keba.com/emobility-app). -
Page 48: Short Description Of The Emobility Portal
The charging station and the mobile device with the installed KEBA eMobility App must be in the same network. ● Portal account and optional users were created in the KEBA eMobility Portal. To register the charging station in the KEBA eMobility Portal, proceed as fol- lows: V4.18 © KEBA 2021... - Page 49 P30 x-series Short description of the eMobility portal 1) Log in to the charging station via LAN or WLAN using the KEBA eMobil- ity App. 2) Register the charging station using the app (“Add Wallbox to portal ac- count” menu item) in the KEBA eMobility Portal. To do this, follow the in- structions on the screen.
-
Page 50: Maintenance
A software update for a charging network must be carried out on the master charging station (P30 x-series). The master charging station passes on the new firmware to the connected client charging stations (c-series) via the soft- ware update. V4.18 © KEBA 2021... - Page 51 6) Connect the USB stick to the USB interface of the charging station. The update starts automatically. 8.2.3 Software update via OCPP backend The software update for the entire charging network can be performed via the OCPP backend. V4.18 © KEBA 2021...
- Page 52 For details on using the FTP link, see the OCPP backend manual. 8.2.4 Software update via eMobility Portal If a compatible charging station is registered in the KEBA eMobility Portal and connected with it, a software update can be initiated conveniently through the portal.
-
Page 53: Index
Ladevorgang starten ...... 38 External meters Router ............ 13 Connection.......... 43 Smart Home Interface...... 41 Ladenetzwerk Software update........ 50 Ports für die Kommunikation.... 14 Switch ............ 13 LAN ............ 9 Load management ........ 33 Web interface........... 22 WLAN............ 10 WLAN Access Point (Hotspot) .... 11 V4.18 © KEBA 2021... - Page 54 Index P30 x-series V4.18 © KEBA 2021...
- Page 56 KEBA Energy Automation GmbH Reindlstraße 51 4040 Linz / Austria www.keba.com...
Need help?
Do you have a question about the KeContact x Series and is the answer not in the manual?
Questions and answers