Related Manuals for Keba KeContact P30 e Series
Summary of Contents for Keba KeContact P30 e Series
- Page 1 KeContact Charging Station Operating instructions V 3.32 Translation of the original instructions...
- Page 2 Specifications are subject to change due to further technical developments. Details presented may be subject to correction. All rights reserved. Reindlstraße 51, 4040 Linz, Austria, www.keba.com/emobility KEBA Energy Automation GmbH +43 732 7090-0, +43 732 7309-10, kecontact@keba.com For information about KEBA and our subsidiaries please look at www.keba.com.
-
Page 3: Table Of Contents
Authorization via RFID ..................Charging process ...................... Starting the charging process ................Ending the charging process ................Short description of the eMobility app ..............Short description of the eMobility portal ..............Error diagnosis ......................10 Maintenance....................... 10.1 Software update....................V3.32 © KEBA 2017... -
Page 4: Introduction
This symbol reminds you of the possible consequences of touching electro- statically sensitive components. Information Identifies practical tips and useful information. No information that warns about potentially dangerous or harmful functions is contained. V3.32 © KEBA 2017... -
Page 5: Purpose Of The Document
The device manufacturer assumes no liability for resulting claims! Warranty Only general maintenance work that is expressly permitted by KEBA may be performed. Any other tampering to the device will result in a loss of the war- ranty claim. -
Page 6: Notes On This Document
Operating the charging station 1.6.2 Not contained in this document ● Assembly/disassembly of the charging station ● Commissioning of the charging station ● Troubleshooting Further documentation Manuals and additional information are available on our website: www.keba.com/emobility-downloads V3.32 © KEBA 2017... -
Page 7: Safety Notes
● Never clean the charging station with aggressive solvents and cleaning products, scouring materials, water jets (e.g. garden hose, pressure cleaner etc.) or excessive pressure. V3.32 © KEBA 2017... -
Page 8: Description Of The Charging Station
... Charging socket with cover (op- ... Holder for charging cable (optional) tional) ... Display (optional) Information Depending on the design of the charging station, the charging socket or charging cable may deviate from the shape shown. V3.32 © KEBA 2017... -
Page 9: Type Plate
... Type examination number ... Accuracy class in accordance with EN 50470-1, -3 ... CE marking of conformity ... Public key information ... Production date ... Production site Fig. 3-3: Example type plate ... Manufacturer ... Manufacturer's address V3.32 © KEBA 2017... -
Page 10: Overview Of Variants
16 A 20 A 32 A Cable type No cable 4 m cable 6 m cable 5,5 m cable Device series e-series b-series c-series a-series x-series WLAN x-series WLAN, 4G x-series 4G x-series 4G, w/o LM V3.32 © KEBA 2017... - Page 11 The measurement of the transmitted energy takes place by means of transducers on all phases to be contacted. Support- ing documents (e.g. on the test mode) can be requested from KEBA. Not all variants deriving from the product designation are available with a calibratable energy meter.
-
Page 12: Options
This chapter lists the possible options of the charging station. 3.4.1 RFID The RFID reader is used for the non-contact authorization of a charging process with MIFARE cards or tags according to ISO 14443 and ISO 15693. Fig. 3-4: RFID ... RFID reader V3.32 © KEBA 2017... -
Page 13: Displays And Operating Elements
The charging station is in commissioning mode. (S3) Flashing red Malfunction; for details, see "Diagnostics" Blue/red Error display via color code; for details on possible causes of er- Red/white ror and troubleshooting, see "FAQs" on our website V3.32 © KEBA 2017... -
Page 14: Display (Optional)
„Insert Plug“: is displayed when the charging station is ready and the charging cable can be plugged in. ● „Swipe Card“: is displayed when an RFID card is to be held over the RFID reader for authorization. V3.32 © KEBA 2017... - Page 15 Display during start-up of the charging station and when starting a charging process The individual characters of the firmware version have the following meaning: vX: Version X, #1A2B: Checksum Transmitted energy of the current charging process Display at start and after completion of a charging process V3.32 © KEBA 2017...
- Page 16 RFID card being used), for traceability of the transaction in billing. Display during the start of a charging process The second part of the identification data is displayed, while the first is replaced by an asterisk (*). V3.32 © KEBA 2017...
-
Page 17: Authorization
RFID, RFID cards need to be taught-in. A maximum of 20 RFID cards can be taught into a charging station. An RFID master card must first be taught-in for this. Using this master card, additional RFID client cards can subsequently be taught-in. V3.32 © KEBA 2017... - Page 18 2) Lift the housing cover at bottom max. 1 cm and then push upwards 2. 3) Unscrew the four screws of the connection panel cover and remove the connection panel cover upwards. The service button in the connection panel is now acces- sible. V3.32 © KEBA 2017...
- Page 19 RFID reader. A successful programming process is confirmed by a rising tone sequence. 3) Confirm the teach-in process within 3 seconds by holding the RFID mas- ter card in front of the RFID reader again. The procedure is concluded by a further rising tone sequence. V3.32 © KEBA 2017...
- Page 20 (P30 x-series). The administration of the permitted RFID cards for the entire charging network is carried out at the master charging station. Information on this can be found in the specific "Configuration Manual". V3.32 © KEBA 2017...
-
Page 21: Charging Process
2) For charging station with charging socket: Disconnect the charging cable at the charging station 3) For charging stations with permanently installed charging cable: Stowing of the charging cable on the holder of the charging station The charging process is completed. V3.32 © KEBA 2017... -
Page 22: Short Description Of The Emobility App
Short description of the eMobility app Short description of the eMobility app The KEBA eMobility App is an extended user interface for the charging sta- tion and is available for compatible KeContact P30 device variants (for de- tails see http://www.keba.com/emobility-app). -
Page 23: Short Description Of The Emobility Portal
Portal account and optional users were created in the KEBA eMobility Portal. To register the charging station in the KEBA eMobility Portal, proceed as fol- lows: 1) Log in to the charging station via LAN or WLAN using the KEBA eMobil- ity App. V3.32 © KEBA 2017... - Page 24 Short description of the eMobility portal 2) Register the charging station using the app (“Add Wallbox to portal ac- count” menu item) in the KEBA eMobility Portal. To do this, follow the in- structions on the screen. Information The KEBA eMobility Portal and another OCPP backend cannot be used at the same time.
-
Page 25: Error Diagnosis
The charging station is faulty Contact your service partner If you have any questions or problems, please contact your service partner. For this purpose, make a note of the product designation and serial number of the device (see "Type plate"). V3.32 © KEBA 2017... -
Page 26: Maintenance
*.zip file. For the P30 x-series, the configura- tion manual must also be observed. Information A software update process on the charging station is indicated by the LED bar slowly flashing orange. V3.32 © KEBA 2017... - Page 28 KEBA Energy Automation GmbH Reindlstraße 51 4040 Linz / Austria www.keba.com...
Need help?
Do you have a question about the KeContact P30 e Series and is the answer not in the manual?
Questions and answers