Condensation Drainage - SystemAir SAVE VTC 200-1 Installation Instructions Manual

8
| Installation
1
W
G
C
M
C — concrete/bricks, W — wood block, G — gypsum, M — mineral wool
X* — adaptable height according to needs.
3
Make sure the mounting bracket is completely level.
Follow the ventilation drawing when connecting the unit to the duct system.
6.1

Condensation drainage

Depending on the relative humidity in the extract air, condensation may occur on the cold surfaces of the unit. The con-
densate water is led out through the drainage (exhaust air side) situated on the bottom of the unit. A one meter hose
with 13 mm (½") connection and a hose clamp are included at delivery. Exhaust air side drainage is not mounted with
an end cap at delivery.
2
x8
Ø8, 50mm x8
X*
60
60
4
47
X*
60
575
398085 | v01