Panasonic HL-G1 Series User Manual page 32

2-1 Functions and Arrangements of I/O Terminal Block
Analog Output Lines
I/O Terminal Block
Ramco Innovations (800) 280-6933 www.panasonicsensors.com nsales@ramcoi.com
No. Name
7 A(V) Analog voltage output
8 AGND Analog ground
9 A(I) Analog current output
10 AGND Analog ground
No. Name
1 OUT1 Judgment output 1
2 OUT2 Judgment output 2
3 OUT3 Judgment output 3 or alarm output
4 TM Timing input
Multi-input
5 MI Zero-set ON, Zero-set OFF, Reset, Memory
change, Teaching, Save, and Laser Control inputs
6 NP NPN/PNP type switching input
11 +SD Transmission data
12 -SD Transmission data
13 +RD Reception data
14 -RD Reception data
15 SG Signal ground
16 + V 24 VDC input for power supply
17 0V Power supply ground
Line colors on a label for connection included in sensor head produced before
December 2010 describes line colors before this modification. Therefore, kindly
confirm the following content before use.
Content of Modification
No.
Name Function
11 +SD Transmission data
12 -SD Transmission data
13 +RD Reception data
14 -RD Reception data
Function
Function
Before changes
Wiring color
Twisted-
pair wire
Twisted-
pair wire
Wiring color
Shield single
conductor
Shield single
conductor
Wiring color
Black
White
Gray
Pink
Violet
Pink/Violet
Twisted-
pair wire
Twisted-
pair wire
Shield
Brown
Blue
Wiring color
Black
White
Orange
White
Black
Gray
Green
Sky Blue
Orange
Yellow
After