Panasonic HL-G1 Series User Manual page 141

Specular reflection Type
Standard
Type
Model No.
High-func
tion Type
Supply voltage
Current consumption
Measurement method
Measurement center
distance
Measurement range
Beam source
*1
Beam diameter ( )
Beam receiving
element
Resolution
Linearity
Temperature
characteristics
Sampling cycle
Voltage
Current
OUT1
OUT2
OUT3
Output operation
Short-circuit
protection
NP switching input
Timing input
Ramco Innovations (800) 280-6933 www.panasonicsensors.com nsales@ramcoi.com
HL-G103A-RA-C5
HL-G103A-RS-J
24 VDC ±10% including ripple 0.5 V (P-P)
26.3 mm
±2 mm
Red semiconductor laser Class 1 (JIS/IEC/GB/FDA laser notice No. 50)
Max output: 0.39 mW, Emission peak wavelength: 655 nm
0.1×0.1 mm
Output range: 0 to 10.5 V (normal), 11 V (at alarm)
Output range: 3.2 to 20.8 mA (normal), 21.6 mA (at alarm)
Load impedance: 300 max.
Judgment output or alarm output (switchable)
NPN open-collector transistor/PNP open-collector transistor (switchable)
<Settings for NPN>
Peak in-flow current: 50 mA
Applied voltage: 3 to 24 VDC (between
output and 0 V)
Residual voltage: 2 V max. (at in-flow
current of 50 mA)
Leak current 0.1mA or less
Open when the output is ON.
At 0 V: NPN open-collector output
At supply voltage of 24 VDC: PNP open-collector output
NPN operation: ON when connecting or connected to 0 V (depending on
PNP operation: ON when connecting or connected to positive terminal of
external power supply (depending on settings)
HL-G105A-RA-C5
HL-G105A-RS-J
100 mA max.
Specular reflection
47.3 mm
±5 mm
CMOS image sensor
±0.2% F.S.
±0.08% F.S./°C
Output impedance: 100
<Settings for PNP>
Peak out-flow current: 50 mA
Residual voltage: 2.8 V max. (at
in-flow current of 50 mA)
Leak current 0.1mA or less
Incorporated (Auto-reset)
settings)
HL-G108A-RA-C5
HL-G108A-RS-J
82.9 mm
±10 mm
0.2×0.2 mm