Mounting; Mounting Requirements - Endress+Hauser Liquiphant FTL51B Density Operating Instructions Manual

Liquiphant FTL51B Density
Endress+Hauser
5

Mounting

Mounting instructions
• Any orientation for compact version or version with a pipe length of up to
500 mm (19.7 in)approx.
• Vertical orientation from above for device with long pipe
• Minimum distance between the fork tip and the tank wall or pipe wall: 10 mm (0.39 in)
 3 Installation examples for a vessel, tank or pipe
5.1

Mounting requirements

The mounting location must be selected such that the tuning fork and the membrane are
always immersed in the medium.
A
 4 Unit mm (in)
A Installation from above
B Installation from below
C Installation from the side
• Avoid air bubbles in pipe or nozzle
• Ensure suitable ventilation
B
Mounting
A0039739
C
A0039685
11