MMP60 SONO GS1
4. Incoming acceptance and product identification
4.1. Incoming acceptance
On receipt of the goods, check the following:
• Are the order codes on the delivery note and the product label identical?
• Are the goods free from damage?
• Do the data on the nameplate match the order specifications on the delivery note?
• Where applicable (see nameplate): are Safety Instructions (XA) provided with the device?
If you can answer "no" to one of these questions, please contact your
Endress+Hauser Sales Office.
4.2. Product identification
The device can be identified in the following ways:
• Specifications on the nameplate
• Extended order code with a breakdown of the device features
on the delivery note
• Enter the serial number on the nameplate in W@M Device Viewer
(www.endress.com/deviceviewer): all the information about the device is displayed.
• Enter the serial number on the nameplate into the Endress+Hauser Operations App or scan
the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser Operations App:
all the information about the device is displayed.
4.3. Manufacturer's address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Address of the manufacturing plant: see nameplate.
Endress+Hauser
Page 9