Maintenance; Gleaning; Grease Filter; Replacingthe Lightbulb - Zephyr elica Glide Use, Care And Installation Manual

0
C
C
C
lm
CLEANING
The cooker hood should be cleaned regularly internally and externally.
For cleaning use the supplied cloth moistened with a neutral liquid detergents. Avoid abrasive detergents.
Warning:
Failure to carry out the basic standards of the cleaning of the cooker hood and replacement of the filters may cause fire
risks.
Therefore we recommend observing these instructions.
GREASE FILTER
This must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must
be set to a low temperature and a short cycle.
When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.
To remove the grease filter, pull the spring release handle (a-b).
.......
:b c ; c b d: p d:[b C > C;
REPLACING THE LIGHT BULB:
WARNING
Disconnect the hood from electricity and be sure the lights are cool.
If new lights do not operate, make sure the light bulb is inserted correctly before calling service.
* Using a flat head screwdriver or equivalent tool, carefully pry loose the lamp so to unthread from the connector.
* Slide out the lightbulb to be replaced and replace with a new 12V 20W 30 ° 035 GU4 bulb type MR11, "suitable for
use in open luminarie'.