FLIR Exx Series Getting Started page 12

2 EN-US English
2.7.1 Disposal of electronic waste
Equipment marked with the below crossed-out wheeled bin is
electrical and electronic equipment. The crossed-out wheeled
bin symbol indicates that waste electrical and electronic
equipment should not be discarded together with unseparated
household waste, but must be collected separately.
2.8 Quick start guide
Follow this procedure:
1. Put a battery into the battery compartment.
2. Connect the USB battery charger to the USB connector at the top of the
camera.
3. Charge the battery for 2 hours before starting the camera for the first time.
4. Insert a memory card into the card slot at the top of the camera.
Note Empty or use a memory card that has not previously been used in an-
other type of camera. The cameras may organize files differently on the
memory card. There is therefore a risk of losing data if the same memory
card is used in different types of cameras.
5. Push the on/off button
6. Follow the instructions on the camera screen to configure your camera. You
can, for example, select the language, units, and date and time formats.
You can also set up the camera to upload images for storage online. To ena-
ble upload of images, you need to connect the camera to a Wi-Fi network
and pair the camera with a FLIR Ignite account. Use a computer or other de-
vice with internet access and follow the instructions on the camera screen.
Note You can do all the settings as a part of the initial setup of the camera
or later at any time via the Settings menu.
7. To enable automatic upload of images, select
Ignite, and set the Auto upload switch to On.
8. Aim the camera toward the object of interest.
#T810585; r. AC/80293/80293; mul
to turn on the camera.
(Settings), sign in to FLIR
9