Advertisement
SUGGESTION:
Throughout these instructions, you will find numbers
in
circles that correspond to the fold-out "Control Reference
Guide" on page 2. While reading, leave it unfolded for easy
identification of control and feature locations.
UNPACKING
With carton resting on floor, fold back top flaps, remove
accessory packet, and carefully turn complete
package
upside down.
Next, slide the carton up and away from the
contents.
Protective plastic wrapping
and foam
inserts may
now
be removed
as the machine
is returned to right-side up.
Save the carton and protective packaging for possible future
use. Inspect machine for any visable damage
which
may
have occurred during transit. If damage
is noted, a claim
should be filed immediately with the transportation
company;
not with TRU-TRAC
Therapy
Products
Inc.
BEFORE INSTALLATION
Before installation, traction force which was preset for ship-
ment must be released
properly to prevent damage.
Complete
these steps before using the Cord Release (5) feature:
A.
VERIFY
that your electrical supply matches the voltage
rating specified on the Voltage Rating & Serial
Number
Plate
(10) . Contact your supplier if the machine
is not
properly rated. Read and follow warning on page 1.
tun
TO REDUCE HE se
SHOCK, DO ků:
7
oF
1
EME EWES, EF
TE HAL SERIE
TRU-TRAC
B.
CONNECT Power Supply Cord (Female End) (12) to
machine's
Power Supply Receptacle
making
sure
that the locking tabs are engaged.
CONNECT
Power
Supply Cord (Male End) (1)
to a properly grounded
electrical outlet. Read
and follow warning on page
1.
Page 4
No. 990002C (10/85)
Advertisement
