Operation; Always Authorized" Operating Mode - WEG WEMOB-STATION-CCS-30kW Series Installation And Operation Manual

Operation

7 OPERATION
After completing the mechanical and electrical installation, the WEMOB-STATION is ready to start
operating by setting the "Q1" circuit breaker.
When the charging station is energized, the display shows an opening video, and the status LEDs of the
connectors will light solid GREEN, indicating that the station is ready to start charging.
NOTE!

Check that the emergency pushbutton is not activated;

The emergency button must not be used as an option to end a charging procedure or to
stop another user from charging.
The WEMOB-STATION charging station features a 10.1" color display that provides a user-friendly
interface with detailed instructions and information to start and stop a charging process, including
information about charging in progress, charging time and battery charge level, allowing the operation of
the charging station in an easy and intuitive way.
The station has three (3) charging authorization modes available, configured in Section 6.1
COMMISSIONING on page 26.

Always Authorized: Allows charging without authentication. Select it to allow free access to
charges;

Authorized by Local List: The users are identified (authenticated) through RFID cards registered
in the "Local List". Such list is managed by the station and has no integration with the OCPP
server;

Authorized by OCPP Server: Authorization is provided by the OCPP server. In this authorization
mode, users and their RFID cards must be registered on the WEMOB platform.

7.1 "ALWAYS AUTHORIZED" OPERATING MODE

It allows charging without authentication (users have free access to charge vehicles). To charge the vehicle,
just follow the instructions shown on the display—the instruction screens will appear successively.
NOTE!

The CCS WEMOB-STATION charging station has only the CCS connector available.
NOTE!

The screens in this manual use the 150 kW charging station as an example;
therefore, consider the maximum power of the product purchased as 30 kW.
To start the charging process:
1. Select connector 2, direct current (DC) CCS type 2 charging connector. At this stage, the
indication LEDs of the corresponding connector will light in solid GREEN;
40 | WEMOB-STATION