General Information
2.7 CONNECTORS
The WEMOB-STATION has a 4.3 m charging cable with CCS-2 Combo plug, suitable for the maximum
output current of the charging station (80 A), which can fit a variety of electric vehicles (EV):
To release the connector from the socket located on the side of the station, perform the sequence of
movements shown below.
Figure 4: Procedure for removing the connector (plug) from the socket
NOTE!
When the electric vehicle is completely charged, insert the connector into the socket located
on the side of the station. Do not leave the charging cable on the floor.
10 | WEMOB-STATION
Figure 3: WEMOB-STATION CCS-2 connector model