Table of Contents
Advertisement
Connectivity
DANGER!
Do not touch live components or parts during the Factory Reset procedure. Use an insulating
material such as a plastic pen to press the "SW2 - RESET" pushbutton safely.
Figure 28: Location of the "SW2 - RESET" pushbutton on the electronic card
6.7 FIRMWARE UPDATE
The market for electric chargers is recent and is constantly evolving. Firmware updates are periodically
released to add functionalities and improve the performance of your charging station. Updates keep your
charging station at the forefront and allow it to keep up with the latest market developments. Update the
charging station with the latest firmware and benefit from additional features.
The update is done remotely using Firmware Over The Air (FOTA) technology, through the "Firmware
Update" command via OCPP. The process of downloading these updates wirelessly usually takes between
three and ten minutes, depending on your connection speed and the size of the update. It is only possible
to download the latest firmware version and not to go back to an old version.
Files are available at:
http://updates.weg.net/chargingstation
ATTENTION!
Point at the firmware directory (URI) corresponding to the purchased charging station model,
at the risk of damaging the charging station.
38 | WEMOB-STATION
Advertisement
Table of Contents
