Table of Contents
Advertisement
ASSEMBLY
PARTS
INCLUDED:
1 - Table
TOOLS REQUIRED:
4 - Legs (2 of each)
2 - Plastic Caps
1/2" open end or box end wrench
9/16" open end or box end wrench
3
8 - Split Lock
Washer
8 - Hex Nuts
4 - Acorn Nuts
step 1
Locate the pack of legs &
hardware and set aside.
step 2
Remove packing material.
step 3
Obtain one leg. Line up leg bolt
with one metal corner bracket.
Check that the small pull pin on the
leg is pointing to the inside
of the table. (see picture)
small pull pin
step 4
Place a split lock washer and hex
nut on each bolt. Hand tighten,
making sure that the leg fits
securely into the corner of the skirt.
Advertisement
Table of Contents
