Unigas HTP2000 Installation Manual page 14

PART II: INSTALLATION
MOUNTING AND CONNECTING THE BURNER
Packing
The burners are despatched in wooden crates whose dimensions are:
2270mm x 1720mm x 1320mm (L x P x H)
Packing cases of this type are affected by humidity and are not suitable for stacking.
The following are placed in each packing case:
burner with detached gas train;

gasket or ceramic fibre plait (according to burner type) to be inserted between the burner

and the boiler;
envelope containing this manual and other documents.

oil flexible hoses;

To get rid of the burner's packing, follow the procedures laid down by current laws on disposal
of materials.
Handling the burner
WARNING! The handling operations must be carried out by specialised and trained personnel. If these opera-
tions are not carried out correctly, the residual risk for the burner to overturn and fall down still persists.
To move the burner, use means suitable to support its weight (see paragraph "Technical specifications").
вилочного погрузчика
погрузчикаThe burner is mounted on a stirrup provided for handling the burner by means of a fork lift truck: the forks must be inserted
into the A anb B ways. Remove the stirrup only once the burner is installed to the boiler.
PART II: INSTALLATION
A
14
H
L
P
B