Configuration Of Control Contact / Inverter Starting And Stopping - Unigas HTP2000 Installation Manual

Configuration of control contact / INVERTER starting and stopping

START INVERTER
Terminal
X5‐3 (24V Out)... X5‐6 (Digit In1)..
X5‐5 (24V Out) connected with X5‐10 ( En.HW)...
Jump
er 5-
10
Bringing 24V to terminal X5‐6 enables INVERTER operation
and the contact that switches it on/off.
On LMV2/3x X5‐3 (24V Out) also powers the motor speed
encoder.
Required to enable braking ramp xxxx
9