Siemens SITRANS F FX330 Operating Instructions Manual page 84

OPERATION
6
Function
C4 Totalizer
C4.1 Flow Totalizer
C4.1.1 Measurement
C4.1.2 Preset Value
C4.1.3 Reset Totalizer?
C4.1.4 Set Start Value
C4.1.5 Start Totalizer?
C4.1.6 Stop Totalizer?
C4.1.7 Information
C4.1.7.1 Volume
C4.1.7.2 Norm. Volume
C4.1.7.3 Mass
C4.2 Energy Totalizer
C4.2.1 Measurement
C4.2.2 Preset Value
C4.2.3 Reset Totalizer?
C4.2.4 Set Start Value
C4.2.5 Start Totalizer?
C4.2.6 Stop Totalizer?
C4.2.7 Information
C4.2.7.1 Gross Energy
C4.2.7.2 Net Energy
Table 6-29: Menu description C4
Function
C5 Display
C5.1 Language
C5.2 Contrast
C5.3 1. Meas. Page
C5.3.1 Function
84
Setting / Description
Select: Volume Flow / Norm. Volume Flow / Mass Flow
"Norm. Vol." is only available if fluid is "Gas", "Wet Gas" or "Gas Mixture".
Set value, which triggers signal on status output (refer to C2.2.4.1).
Select: Yes / No
Set start value in selected unit.
Start value has to be confirmed with "Yes" or refused with "No".
Select: Yes / No
Select: Yes / No
Display of current totalizer values.
The menus C4.1.7.1 to C4.1.7.3 are available depending on selected measurement
variable in C4.1.1.
Display of current totalizer value for volume flow.
Display of current totalizer value for norm. volume flow.
Display of current totalizer value for mass flow.
This menu is available for meter types ≠ "Standard" and for medium = "Steam" or
"Water".
Select: Gross Energy / Net Energy
"Net Energy" is only available, if fluid = "Steam" or medium = "Water".
Set value, which triggers signal on status output.
Select: Yes / No
Enter current value in selected unit.
Start value has to be confirmed with "Yes" or refused with "No".
Select: Yes / No
Select: Yes / No
Display of current totalizer values.
The menus C4.2.7.1 and C4.2.7.2 are available depending on selected measurement
variable in C4.2.1.
Display of current totalizer value for gross energy.
Display of current totalizer value for net energy.
Setting / Description
Available display languages: German, English, French, Italian, Spanish, Russian,
Chinese, Swedish, Danish, Czech, Polish, Turkish, Slovenian;
13 further languages in preparation (for details refer to
Adjust contrast of local display (-10...+10).
Configuration of the first measurement display page.
Select: One Value / Two Values / Three Values / One Value & Bargraph / Two Values &
Bargraph
www.siemens.com/flow
SITRANS FX330
Menu languages
on page 60)
05/2019 - A5E36751269-AE