Siemens SITRANS F FX330 Operating Instructions Manual page 59

Vortex flowmeters
Table of Contents

Advertisement

SITRANS FX330
The table below lists the access levels, their default passwords and associated permissions.
Access level
Access level
Access level
Access level
User
Operator
Expert
Table 6-5: Access levels
INFORMATION!
When a particular access level has been enabled, please pay close attention to a "lock" symbol
which might be present at the right side of a menu entry. This lock symbol indicates that your
current access level allows you to read but not write this entry.
INFORMATION!
When entering the four digit password please be sure to type in all leading zeroes
default "Operator" password as "0009" and not only "9" by skipping the remaining digits.
INFORMATION!
After a cold start of the device the user role will always be reset to "User".
Reset passwords
Reset passwords
Reset passwords
Reset passwords
In case the user has changed particular passwords from their default settings and is not able to
log in anymore, there is a "Reset Passwords" command available in the C6.2.3 submenu.
However to prevent unauthorised use this command itself is protected by a non-changeable
unique password available by contacting the manufacturer.
05/2019 - A5E36751269-AE
Default password
Default password
Default password
Default password
Permissions
Permissions
Permissions
Permissions
0000
View device information
(any unassigned
Configure the display (C5), including changing the display
password)
language and the content of the measurement pages
0009
All rights of "User" access level
Configure binary output (C2.2)
Configure all HART
exception of "C3.1.1 Current Loop Mode"
Change "Operator" password (C6.2.2) – note that the new
password must have three leading zeroes ("000")
Activate a different meter type
0058
All configuration rights, especially process setup (C1) and
current output (C2.1)
Change "Expert" password (C6.2.2) – note that the new
password must have two leading zeroes ("00")
www.siemens.com/flow
OPERATION
®
communication options (C3) with the
6
i.e. enter the
59

Advertisement

Table of Contents
loading

Table of Contents