Table of Contents
Advertisement
Available languages
Available languages
| Speaker Connections
Caution:
To avoid damaging the speakers by inputting a
sudden high-level signal, be sure to switch the power
off before connecting the speakers.
Connect each speaker to the corresponding speaker
terminals, as desired. For "Speaker Installation", refer
to page 19.
Notes:
@ When
using the rear speakers,
be sure to connect
them to both channels
(L and R). If a speaker is
connected
to only one
channel,
no
sound
will
be
heard.
@ Use speakers with a nominal impedance of 8 ohms
or more.
Connect the speaker cords to the speaker terminals as
shown in the following illustration.
Press the lever, insert the stripped.
end of the
cord, then release the lever so that the cord is
held securely.
Advertisement
Table of Contents
