Teac AG-V4200 Owner's Manual page 17

VIDEO OPERATIONS
Playing Video Sources.
Note:
For playing video software using a certain Surround
Effect function, refer to the SURROUND EFFECTS
section.
POWER ON m&. : Video signals
: Audio signals
Speakers
1. Press the VCR 1 or VCR 2 button.
2. Play the component corresponding to the button
pressed.
3. The picture from the video source can be seen on the
TV and the sound from the video source will be heard
from the speakers.
Tape Dubbing (from VCR 2 to VCR 1)
POWER ON m& : Video signals
cX : Audio signals
Playback Recording
1. Press the VCR 2 button with the TAPE MONITOR set
to OFF.
2. Operate VCR 2 for playback.
3. Operate VCR 1 for recording. In this way, the
video/audio signals from VCR 2 can be dubbed onto
VCR 1.
estes