Product Set Up - Nuna mixx next Manual

Product Set Up

Open Stroller
1
- Open the storage latch as shown.
2
- Lift up on the handle from the sides and rotate to the
rear of the stroller. A "click" sound means the stroller
frame is open completely.
3
- Squeeze the recline adjustment button on the back of
the seat and rotate the backrest to the upright position.
Check that the stroller is open completely before
continuing.
Canopy
4
- Zip the canopy visor to the inside of the canopy.
Front Wheels
5
- Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely. Repeat on
opposite side.
Check the wheel is securely attached by pulling out.
6
- To remove the front wheel, press the release button (1)
and detach the front wheel from the front leg (2).
11 MIXX next instructions
1
2
3
click
4
5
click
6
2
1
MIXX next instructions 12