Table of Contents
Advertisement
Product Set Up
Open Stroller
1 - Rotate the handle up to open the stroller frame. (1)
2 - Pull the seat to open it. (2) A "click" sound means the
seat is open.
Switch Seat
Please switch seat if you needed.
1 - Press the seat release button (3)-1 and lift the seat up
(3)-2.
2 - Reverse the seat, and then attach it to the frame. (4)
A "click" sound means the seat is attached completely.
Arm Bar
1 - Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. (5)
A "click" sound means the arm bar is assembled
completely.
2 - To remove the arm bar, press the arm bar release buttons
(6)-1 and remove the arm bar (6)-2.
24
instructions
IXXA
Product Use
Securing Your Child
1 - Push the top button on the buckle (7)-1 to release the
buckle latch and remove the magnetic clips (7)-2. Place
your child in the stroller.
2 - Insert the magnetic clips into the buckle. (8)
3 - Fit the harness snugly to your child by pulling the
adjustment straps to tighten (9)-1. Then pull the waist
adjustment straps out (9)-2.
Shoulder Harness Position
1 - The upper shoulder harness buckles can be moved up
and down for added adjustment. (10)
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and
the shoulder harness should be about the thickness of
one finger.
Canopy
1 - To open the canopy, pull the canopy toward the front of
the seat, and to fold, push it back. (11)
2 - Open the zipper on the canopy for extra shade. (12)
Calf Support
The calf support has 3 use positions.
1 - To raise calf support, push the calf support from position
1 to position 3. (13)
2 - To lower calf support, press two adjustment buttons on
the bottom of the calf support (14)-1, and rotate the calf
support downwards. (14)-2.
instructions
25
IXXA
Advertisement
Table of Contents
