Nuna mixx next Manual page 9

Rear Wheels
1
- Insert the rear wheel into the rear leg. A "click" sound
means the rear wheel is assembled completely. Repeat
on opposite side.
Check that the wheel is securely attached by pulling
them out.
2
- To remove the rear wheel, press the release button (1)
and detach the rear wheel from the rear leg (2).
Arm Bar
Always secure the child with the harness. The arm bar is
not a restraint device.
3
- Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place (1). A "click" sound means
the arm bar is assembled completely.
To remove the arm bar, press the arm bar release buttons
(2) and lift the arm bar up. (3)
4
- For a more compact fold when the seat is rear facing,
press the armbar adjustment buttons (1) and rotate the
armbar down (2) until it clicks into place.
NEVER use the armbar in lowered/folded position when
child is in stroller.
5
- Fasten the inner snaps of the seat pad to the inside of
the seating area as shown.
Check Set Up
Stroller frame is latched open
Front wheels and rear wheels securely attached
Canopy mount attached to stroller frame
Arm bar is securely attached
13 MIXX next instructions
1
click
2
2
1
3
3
1
1
2
2
click
4
1
2
click
5
MIXX next instructions 14